微波EDA (m.ostronger.com) 網友回復：

• 網友回復

  以前的帖子里面說可以用lump network element里面的電感值來代替虛部。
  不過具體細節不是很清楚。
  望給個解答

• 網友回復

  有誰可以幫忙回答,謝謝.

• 網友回復

  好像現在還不可以 上次說錯了 請見諒

• 網友回復

  Macros Construct   Discrete Ports Discrete port with lumped elementThis is useful when the port needs to be matched to an external device whose impedance is not purely real. For example, RFID antennas at low frequencies (in the MHz range) often behave as an inductor: a capacitor needs to be added in series with the discrete port, in order to obtain a good match at the desired frequency.
  
  好像可以完成你要的功能，但是我不知道這么用？
  知道的人說一下哈

  
  Image00000.gif

• 網友回復

  Macros Construct   Discrete Ports Discrete port with lumped elementThis is useful when the port needs to be matched to an external device whose impedance is not purely real. For example, RFID antennas at low frequencies (in the MHz range) often behave as an inductor: a capacitor needs to be added in series with the discrete port, in order to obtain a good match at the desired frequency.
  
  好像可以完成你要的功能，但是我不知道這么用？
  知道的人幫忙說下

  
  Image00000.gif

• 網友回復

  Macros  Construct   Discrete Ports  Discrete port with lumped element
  This is useful when the port needs to be matched to an external device whose impedance is not purely real. For example, RFID antennas at low frequencies (in the MHz range) often behave as an inductor: a capacitor needs to be added in series with the discrete port, in order to obtain a good match at the desired frequency.
  
  
  
  好像可以完成你要的功能，但是我不知道這么用？
  
  知道的人幫忙說下

• 網友回復

  誰可以幫忙解釋要如何設置才正確,謝謝.

申明：網友回復良莠不齊，僅供參考。如需專業解答，推薦學習李明洋老師的CST培訓視頻，或咨詢本站專家。